Mirado – bimetallic radiators

 25 year warranty
 25 year warranty

Bimetallic heat radiators “Mirado ” are widely used with any heating systems.

Heat radiator is produced on advanced equipment from specially prepared aluminum alloy meeting quality standards ENAB46100, this allows ensuring comfortable exploitation for not less than 50 years.

Bimetallic heat radiators Mirado are represented by a model with an axle spacing of  500, 300  mm.

 25 year warranty
Calculate wholesale price

Advantages

High heating capacity
Fit for installing in usual as well as low-temperature systems with any type of boiler modules including with condensation boilers
Effective protection from pressure hammers
Structural solidity allows exploitation of heat radiator in conditions of high pressure and non-prepared heat carrying agent
Coloring of a thermal radiator by anaphoresis method according to German technologies.
Quality certificates and technical documentation
Manufacturer warranty for aluminum heat radiator Mirado for 25 years; (subject to complying with norms and conditions of assembly and exploitation described in product certificate)
Sectional assembly from the manufacturer of 4,5,6,7,8,10,12 sections

Specifications

Axle spacing L, mm
300
Depth of section В, mm
100
Width of section С, mm
80
Height of section А, mm
352
Volume of heat carrying agent, l
0,165
Heat output of one section Δt=70°C, W
151
Heat output of one section Δt=60°C, W
108
Heat output of one section Δt=50°C, W
92
Max temperature of heat carrying agent, °С
120
Max operating pressure, Bar
30
Testing pressure, Bar
45
The value of the hydrogen index, pH
6,5-10,5

Installation and operating recommendations

  • Installation of radiators should only be carried out: + ×
    • If there is a heat engineering project created by a licensed design organization and certified by the organization responsible for the operation of the heating system of the room in which this radiator is planned to be installed; by a specialized installation organization; in accordance with building codes and regulations.
    • After the radiator has reached room temperature naturally, without direct exposure to heating devices.
    • With the mandatory possibility of cutting off the inlet and outlet of the coolant with special fittings.
    • Recommended installation and operating conditions:
    • For optimal heat transfer of radiators, the distance between the radiator and the floor should be 70-120mm, and between the radiator and the window sill at least 80mm. The brackets must provide a distance of 30-50mm from the wall, as well as a horizontal position of the radiator.
    • Immediately before installing the plugs and adapters, lubricate the gasket with a heat-resistant (up to 135°C) silicone sealant.
    • It is recommended to install the radiator to the pipelines without removing the protective plastic film, which will protect the appearance of your radiator.
    • In the case of a one-way side connection of a radiator with a number of sections more than 12, it is recommended to install a flow guide with a length ≈ ≈ of the radiator length in the intake manifold.
    • It is not recommended to reconfigure radiators in order to reduce or increase the number of sections, as well as replace individual sections of the radiator.
    • Warranty obligations do not apply to refurbished radiators.
    • During Operation, it is necessary to periodically remove air from the Upper Collector using an air outlet valve.
    • It is not recommended to open the radiator valves abruptly to avoid hydraulic shock. The radiator must be filled with coolant during the entire period of operation in accordance with clause 1.3 of this passport according to GOST 31311-2005, EN 442.
    • Transportation and storage of radiators should be carried out in accordance with GOST 31311-2005, EN 442.
    • Number of sections in radiators that are mass-produced: from 4 to 12.
    • During transportation, the twisted nipple inside the radiator may be slightly loosened, so before installing the radiator in the heating system, it is necessary to tighten the nipples connecting the sections to each other.

Documentation

Certificate of Conformity: sectional radiators
Download
Passport and warranty terms for sectional radiators pass
Download
Conclusion of sanitary – epidemiological examination: sectional heating radiators
Download
Insurance policy
Download

Specifications

Axle spacing L, mm
500
Depth of section В, mm
96
Width of section С, mm
80
Height of section А, mm
554
Volume of heat carrying agent, l
0,195
Heat output of one section Δt=70°C, W
202
Heat output of one section Δt=60°C, W
173
Heat output of one section Δt=50°C, W
155
Max temperature of heat carrying agent, °С
120
Max operating pressure, Bar
30
Testing pressure, Bar
45
The value of the hydrogen index, pH
6,5-10,5

Installation and operating recommendations

  • Installation of radiators should only be carried out: + ×
    • If there is a heat engineering project created by a licensed design organization and certified by the organization responsible for the operation of the heating system of the room in which this radiator is planned to be installed; by a specialized installation organization; in accordance with building codes and regulations.
    • After the radiator has reached room temperature naturally, without direct exposure to heating devices.
    • With the mandatory possibility of cutting off the inlet and outlet of the coolant with special fittings.
    • Recommended installation and operating conditions:
    • For optimal heat transfer of radiators, the distance between the radiator and the floor should be 70-120mm, and between the radiator and the window sill at least 80mm. The brackets must provide a distance of 30-50mm from the wall, as well as a horizontal position of the radiator.
    • Immediately before installing the plugs and adapters, lubricate the gasket with a heat-resistant (up to 135°C) silicone sealant.
    • It is recommended to install the radiator to the pipelines without removing the protective plastic film, which will protect the appearance of your radiator.
    • In the case of a one-way side connection of a radiator with a number of sections more than 12, it is recommended to install a flow guide with a length ≈ ≈ of the radiator length in the intake manifold.
    • It is not recommended to reconfigure radiators in order to reduce or increase the number of sections, as well as replace individual sections of the radiator.
    • Warranty obligations do not apply to refurbished radiators.
    • During Operation, it is necessary to periodically remove air from the Upper Collector using an air outlet valve.
    • It is not recommended to open the radiator valves abruptly to avoid hydraulic shock.
    • The radiator must be filled with coolant during the entire period of operation in accordance with clause 1.3 of this passport according to GOST 31311-2005, EN 442.
    • Transportation and storage of radiators should be carried out in accordance with GOST 31311-2005, EN 442.
    • Number of sections in radiators that are mass-produced: from 4 to 12.
    • During transportation, the twisted nipple inside the radiator may be slightly loosened, so before installing the radiator in the heating system, it is necessary to tighten the nipples connecting the sections to each other.

Documentation

Certificate of Conformity: sectional radiators
Download
Passport and warranty terms for sectional radiators pass
Download
Conclusion of sanitary – epidemiological examination: sectional heating radiators
Download
Insurance policy
Download